WTB: Concave washer under strut

[biltwok2]

There is a flat washer and a concave washer ( I've seen it called a seal ring and a dust protector) under the front strut bearing. I need at least one of the concave washers. I believe the part # for the concave washer is 31331110196. Car is a 76 if it matters. Email me and I'll confirm with a pic.

Saves me a 50 mile trip to a dealer.

[M3M3]

if this is the washer that goes between the spring hat and the strut bearing, you do not need the special concave one with new strut bearings. the old one kept dirt out of the bearings. new strut hats have sealed bearings. you can use a proper sized flat washer instead.

[jgerock]

if this is the washer that goes between the spring hat and the strut bearing, you do not need the special concave one with new strut bearings. the old one kept dirt out of the bearings. new strut hats have sealed bearings. you can use a proper sized flat washer instead.

Hmmm - wonder where you got that idea Marshall. Maybe from swapping out my front struts THREE times on my car (sorry 'bout that).

[mthaynestii]

I just put in new strut mounts(Mehle) from Blunt, and they do not have sealed bearings.