WTB: Early baby bumperettes

[FunElan]

Anybody have these? We need them for my dad's cabriolet.

megamatt05 at aol dot com

Thanks!

[eastsidebimmer]

Aardvark might be able to sell you a set, but without cores...it will cost you!

If you end up with lots of offers to sell (!) let me know please

[dukepol]

Front or rear I have both in driver condition no dents or rust.

Thanks,

Duke

NutNbut02s

[Guest Anonymous]

I may have a pair.

Francis Ferrance

1972 2002

Ferrance@aol.com

Wrightwood CA

[alpinaguy]

are you talking about the early Euro bumper-ettes or the U.S. ones shown in your photo? The early ones are small arrow shape.

[FunElan]

My bad, I should've been more specific, the front ones, like on this car: http://www.google.com/imgres?imgurl=http://www.usautoparts.net/bmw/pics/vintage/14110_1024.jpg&imgrefurl=http://www.usautoparts.net/bmw/models/newclass/1600.htm&h=768&w=1024&sz=184&tbnid=7HFqnr1R-9jBZM:&tbnh=113&tbnw=150&prev=/images%3Fq%3Dbmw%2B1600&zoom=1&q=bmw+1600&hl=en&usg=__VjVIZL5i7ByuMD9Bxi958_dD-7I=&sa=X&ei=eoRETfzGK5G0sAP9wqXECg&ved=0CBwQ9QEwAQ

[alpinaguy]

Yes. These are the Euro "arrow shape". I have these on my 02. I purchased them new 15 years ago from Jaymic in England. I was told they are still available. You will only need a pair L&R since they are not made for the rear. The Euro's will fit U.S. front bumpers. You will need joiner collars L&R for rear. The collars will not fit U.S. spec rear bumpers. Unfortunately the rear Euro bumpers were designed slightly different. The "stubby" horn ends are narrower where they join the center bumper. I was able to find proper Euro ends but U.S. ones will work too with a bit of grinding and then you will need to seal or chrome them. If you don't as you know they will rust. Sorry I don't have a pair. I only have the U.S. bumper-ettes. I know the rear joiner collars are available also. I hope this info was helpful.