Complete m10

[1968_1600]

Looking for a complete m10 preferably the 2.0 version

6 bolt flywheel or 8 bolt manual flywheel as I want to keep my 4spd

[roadhog0]

If you were in Seattle I would have one for ya....

[HBChris]

Since you want a 2.0 anyway, find a motor with 8 bolts, the 6 bolts are hard to find and the pressure plate is very expensive (it has three fingers only) and the T/O bearing is NLA. And you can never put a 5 speed on the 6 bolt later on when you decide to do some upgrades. I went through this last year.

[1968_1600]

Thanks for the info ill try to find a 8 bolt engine and a 2.0

[pkbinplano]

I have a NOS 1800 block and new NOS 1800ti Mahle 9.5-1 st bore piston if interested but not cheap

[1968_1600]

is that an 8 bolt block?

[pkbinplano]

I'll have to pull it out and check.

[norm]

I have my motor out of my 2000c. Stamped on the head 121ti with a 1966 date stamp. The motor is a two liter with 6 bolt crank. Does not smoke, little old lady driver. I had a newer style clutch machine to a 6 bolt flywheel with no problems. The just re-drilled the holes

Norm

Sacramento,CA

[2002inblaine]

I have an M10 with a 38 Weber carb. Right now it's attached to a 5 spd trans. I'm looking to sell it all. I'm in MN. Let me know if you are still looking for an engine.

[1968_1600]

Just bought one for ludvig about three weeks ago thanks though