Jump to content
  • When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Transmission Identification


pony69

Recommended Posts

Found this Transmission today in a boneyard. They told me it is out of an '83 e21. There are two sets of casting numbers - 242.0.291.01 5.4 225 (tail section) & 242.0.325.00 1.1 225 (inside bell housing). Any help would be appreciated.

post-19098-13667668384213_thumb.png

post-19098-13667668387935_thumb.png

Link to comment
Share on other sites

those numbers you list are not part numbers

just mfg. casting numbers

clean inside here and reveal the production date

month/year which will narrow it down

t_screen_shot_2013-01-17_at_9.36.35_pm_198.png

'86 R65 650cc #6128390 22,000m
'64 R27 250cc #383851 18,000m
'11 FORD Transit #T058971 28,000m "Truckette"
'13 500 ABARTH #DT600282 6,666m "TAZIO"

Link to comment
Share on other sites

The yard also said this may be out of a european grey market car.... I'll look for the date markings you described.

I'm going out on a limb in saying its a 4-speed tranny from the 323i or 320/6....

http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,380487/

Grab a tape measure, the bell housing dimensions should be similar to these.

getrag260dimensions.jpg

Link to comment
Share on other sites

It looks like a M10 bell housing to me. The bolt spacing for the M20 engine at the top of the block is closer together than this one looks. plus it has the hole for checking ignition timing.

1970 1602 (purchased 12/1974)

1974 2002 Turbo

1988 M5

1986 Euro 325iC

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Upcoming Events

  • Supporting Vendors

×
×
  • Create New...