1600ti or 2002tii pic request

[pkbinplano]

Need a pic of the original tii or 1600ti air box installation . Thanks . Also looking for a spare mounting bracket. Thanks

[2761377]

hth

let me know if you need another angle.

robert w.

[BillWilliams]

With the exception of the strut brace, which I am not fussing about, that is about the most original airbox I have seen.

Robert, those clamps on your throttle body are as valuable as most 2002s. They are unobtainable.

[c.d.iesel]

[hanksjim1]

you might also consider this Alpina mounting arrangement for cars without the Ti/Tii brackets welded to the inner fender. Should be easy to fabricate out if sheet aluminum.

[hanksjim1]

you might also consider this Alpina mounting arrangement for cars without the Ti/Tii brackets welded to the inner fender. Should be easy to fabricate out of sheet aluminum.

[Hans]

What carbs are you using?

[c.d.iesel]

[kris]

[Putt2]

Robert thanks for the photo can you also get a few shots of the brackets the are attached to the inside of the fender?

[jgerock]

Almost everything I've got....

[2761377]

With the exception of the strut brace, which I am not fussing about, that is about the most original airbox I have seen.

Robert, those clamps on your throttle body are as valuable as most 2002s. They are unobtainable.

thank you for the kind words, sir. i appreciate your expertise and will preserve the set-up until someone pries this car out my cold, dead hands.

not for nothing do i use it's chassis # as my ID. on every forum i've used since january 2003.

[jgerock]

From tundra 72 tii 2760240. Note some details about this car are not original.

Hoses

Throttle body clamps

[jscaptura1]

If I am not mistaken, did'nt the original 1600ti come with 2 single bbl carbs? I saw and article for it once years ago. I am looking for it & will post if I find it. Has anyone else ever heard of that set up for the 1600 or am I just off my rocker? (again!)

[jgerock]

If I am not mistaken, did'nt the original 1600ti come with 2 single bbl carbs? I saw and article for it once years ago. I am looking for it & will post if I find it. Has anyone else ever heard of that set up for the 1600 or am I just off my rocker? (again!)