engine and drivetrain How Does This Baffle Fit? Anyone Using? Pics?

[GreenSwede]

I'm looking around for baffle or a baffled pan, and found this. I thought I'd find it this side of the ocean, but I don't know..

 

How do I install that..? Weld in "standing"? Anyone using this and got pics?

Edited September 8, 2014 by GreenSwede

[pkchopp]

That's not for a M10

 

 

 

Edited September 8, 2014 by pkchopp

[Harv]

That's a really nice oil pan!

 

John

[pkchopp]

That's a really nice oil pan!

 

John

You Alive!

[Rocan]

My baffle... Goes well with the scraper. More consistent oil pressure

Edited September 8, 2014 by Rocan

[GreenSwede]

My baffle... Goes well with the scraper. More consistent oil pressure

 

 

Is that the IE baffle?

 

I found the one above on a somewhat confusing PDF from a German company, listed under M10. But I couldn't figure it out..

[GreenSwede]

I just got a reply to an email I sent the same german company.

 

They sent me a link: http://www.kolb-motorsport.de/Motorteile/M10/Motorteile%20BMW%20M10.pdf

 

And prices:

 

From what I've understood Schottblech is baffle.

Schottblech                    59,00 EURO

 

Ölhobel                        159,90 EURO

 

Versand Schweden        25,90 EURO

So, according to them, it's for an M10. Don't ask me how it fits=)

[73touring]

Just a thought. The oil pump pickup appears to be e30. Is the baffle for the lower part of the e30 sump?

[GreenSwede]

Maybe so. I've never fiddled with a E30 pan.

 

I guess IE's is the way to go. It just bugs me that the shipping across the ocean costs more than the baffle.

Edited September 9, 2014 by GreenSwede

[73touring]

I hear you, In the next year or so Ive a big bill of shiny stuff I want to order from Ireland Eng but I want to make sure I'Ve everything to together and don't have to repeat it + customs are evil

[GreenSwede]

Ah, yes. You're irish! I might be heading to Ireland this spring. I was there during the 90's and liked it. Good beer, good whisky, and nice people. I won't be driving the 02, though.

 

I'm trying to find more vendors of 02 parts on this side of the ocean. I know of Cahsel (pricy), Walloth & Nesch (just stock), Jaymic and maybe Ahrend, Winter Tuning, Roesch.. Do you know of any more?

[02Les]

Ah, yes. You're irish! I might be heading to Ireland this spring. I was there during the 90's and liked it. Good beer, good whisky, and nice people. I won't be driving the 02, though.

 

I'm trying to find more vendors of 02 parts on this side of the ocean. I know of Cahsel (pricy), Walloth & Nesch (just stock), Jaymic and maybe Ahrend, Winter Tuning, Roesch.. Do you know of any more?

There's Linwar in the UK.

 

http://www.linwar.com/

[felix_666]

My baffle... Goes well with the scraper. More consistent oil pressure

 

Make sure you get someone to weld in the baffle similar to the above, although I think this might be overkill by a factor of 2, better to be safe than sorry, I'm guessing the owner welded it in place?

 

The monkey who welded mine in, before I was able to weld, made the welds too big and warped the BRAND NEW sump, not to mention it wasn't straight.

[Rocan]

Yes, it is an IE baffle. Felix noticed something very important; only use a few tacks to hold it in place. nothing more is needed. doing more will warp the pan.

[73touring]

Actually Jaymic could well stock the Ireland Eng baffle if you give them a buzz. Sterling is a bit pricy at the moment though