body and interior Heater Box Rebuild - Grommet w/2 Holes Source Anyone?

[02tom]

Before I put this heater box back together, thought I'd ask, as this worked out for the better with my wiper rebuild.  Looking for the grommet with 2 holes for the bowden cables if anyone knows of a source.  64 11 1 351 472 shows NLA everywhere I've looked.  I'm about to use the best one I have with some RTV to seal it up, but would much rather put in a new one.

 

Also, the bowden cable 64 11 1 351 472 is currently the only one that shows NLA and I'd prefer a new one, though I've used some synthetic chain lube and freed up my old rusty one.  I know it's a long shot, but also looking for a source.

 

Just an FYI to anyone doing their heater box, the resistor is still available, and after my first rebuild years ago of the heater box fail miserably because of no power getting beyond the resistor once the box was put together and installed in the car, I recommend replacing it... and bench testing is a good idea too.  64 11 1 351 507

[Hans]

You may be able to adapt a universal choke cable. There was some other source I found years ago- maybe marine? Or lawn mower? Try google on Bowden cables.

[Simeon]

I would get a universal blanking grommet and cut holes in it.