steering and suspension Do I need a Momo horn ring?

[burndog]

I have a Momo wheel and everything looks to be in place. I would like to install a horn ring to use for my horn. What do I need? There s no horn ring currently installed in the hub...

[Jace]

assuming the horn button you have is genuine, you need one of these to center it tightly in the hub

http://www.ebay.com.au/itm/MOMO-Horn-Button-Retainer-Ring-/230957009480?hash=item35c61c4a48

Edited September 27, 2015 by Jace

[burndog]

dude, thanks!!! Now what about the horn ring / spring itself? Is there one specific to the diameter of the Momo hub?

[M3M3]

The horn ring is the stock bmw part. There is no special momo part.

The hub should have a spring loaded pin on the back that tracks around on the bmw ring.

[Greg intheClaw]

Yes, Any help would be appreciated! Both the stock horn ring and the MoMo steering wheel have the brush contact. I am needing a spring loaded contact brush assembly in order for the MoMo to operate.

Edited October 7, 2015 by Greg intheClaw

[Guest_anonymous]

something like this:

http://www.ebay.com/itm/MOMO-Hub-Adapter-Horn-Connector-Plunger-Style-/121532035468?hash=item1c4bdfb18c

 

 

 

sometimes called a carbon pin

Edited October 7, 2015 by dar_on_

[Hans]

I vaguely recall adapting on original BMW pin assembly to fit my Momo. On a Nardi wheel, it was necessary to shorten the pin a bit.

[Greg intheClaw]

Yes! Thank you! 

[omarcenaro]

assuming the horn button you have is genuine, you need one of these to center it tightly in the hubhttp://www.ebay.com.au/itm/MOMO-Horn-Button-Retainer-Ring-/230957009480?hash=item35c61c4a48

Here is the pic of the part. As often as I see use the search function this will help when the eBay listing is long gone.