Found, thanks. 02 Odometer drive piece that mounts on side of speedometer

[goodkarmech]

As I was repairing my speedometer, I was pressing the brass gear back onto the shaft and it broke.

I thought I was lucky because I had saved some parts from another speedometer.

To my surprise, I discovered there are two versions - one with coarse gears and grooves and one with fine.

I am in search of the coarse gear version, the top one in the photo.  The brass gear has 10 teeth.(the fine version has 17)

I will also entertain the purchase of complete broken speedometers if not too expensive.

Thanks for looking and any help.

 

Edited September 2, 2017 by goodkarmech

[71bmr02]

I'll check my bin of  spare speedometers and parts, should be able to come up with what you need

 

Gale H 

[71bmr02]

found the part, pm or email for details.

 

Gale H

 

douggaleh at hotmail dot com

[halboyles]

The only thing I can add after looking at over a half dozen speedo's is some confusion.  I didn't find any with 10 teeth but I found several with 17, ~30 and 12.  The ~30 tooth one was a '69, the others were '74-'76.  Must be many versions out there.  See rather blurry pic.

[goodkarmech]

Thanks for looking Hal.  Who knew there were all the variances.

The brass gear I am counting teeth on is on the end of the worm shaft, out of the pictures.  

Best seen with back mount removed from speedo. 

Gale H has messaged she has what I need.

If not I'll get back to you.

Thanks,

Al

[halboyles]

I think I was looking at the wrong gear Al.  Let me know if you don't get one and I will revisit the stack.

[goodkarmech]

OK, Thanks Hal, I have arranged to get one from Gale H.

Al