What did you do to your 2002 today !

[jp5Touring]

Replaced my broken  Weber float on my DCOE's.

I screwed up the float measurement first try, a little chemo brain I think.

Corrected my mistake changed my chokes from 34mm to 33mm and a different air corrector.

Car is running  strong and likes to rev up high.  ?  Come on Spring. 

[BarneyT]

Finished up a break job on my son Ellis’s 72 golf, and making good progress on shop addition….

 

Edited March 17, 2022 by BarneyT
Wrong picture

[Fortlauderdalian]

Started cleaning up the ignition on the 1600 it had one of those aftermarket CDI  Mark Ten B boxes. 

 

Next it was on to replacing the alternator bushings although it probably could have gone another 100k   The grease I scraped off the bracket was thicker than the remainder of the bushing.  I also put a new capacitor but the one on the distributor goes though the side and the new one is meant to notch in so I spliced it in. Question, if the rotor spins clockwise where is the correct location for the wires. Anyone have a diagram?  Thanks

[Pdxguy]

On 3/13/2022 at 1:35 PM, tomphot said:

Putting the final touches on the newly rebuilt original engine.  Reattached the front bumper.  Sprucing up engine bay to get it all ready.  Really need to address the ride height up front!!

 

 

Shiny engine cover, looks beautiful. Is it painted?

[Conserv]

1 hour ago, Pdxguy said:

Shiny engine cover, looks beautiful. Is it painted?

Looks vapor honed…

 

Regards,

 

Steve

 

[tomphot]

16 minutes ago, Conserv said:

Looks vapor honed…

 

Regards,

 

Steve

 

Yes, had everything vapor honed at a local shop that does vintage motorcycles.  Turned out great!

[tomphot]

2 hours ago, Pdxguy said:

Shiny engine cover, looks beautiful. Is it painted?

Thanks- Vapor honed. 

[tzei]

Installed oil pan and water pump.

[2002iii]

3 minutes ago, tzei said:

Installed oil pan and water pump.

Looks like you need a skid plate to protect that beautiful dry sump aluminum oil pan!!!!

 

I can't wait too hear this beast roar!!!

[tzei]

I actually have a skid plate under engine bay. It’s just that my cross member & rack is so darn close! Or my engine is too low but that can’t be now can it?

[Markster]

Got the headliner fitted!  Gonna let it sit for a week before I get up the nerve to break out the landau top cement. 
 

I chose leather on the B Pillars. Seems ok. Smells nice too! 
 

Rear bow restoration and installed without a hitch. New clips too. 

 

 

 

 

 

 

 

 

[BarneyT]

This morning Greg Resa and I made the trip in to Austin for a combined C&C with the Tejas chapter, wonderful turn out and beautiful cars…

[factus6]

I would like to present what I have done in 7 years to save this striking work of art from Munich, I love her even with the rusty doors

[SydneyTii]

6 hours ago, factus6 said:

 

Lovely colour!!

[jp5Touring]

Speedhut gauges showed up today. I think I'm okay with enough wire to get them done.