For Sale: Lots of 2002 Parts - Check It Out!

[Brandon]

1 hour ago, Bill Hayes said:

Brandon,  I’m in need of a rear cover and shift shaft in good condition for my 4 speed transmission on my 76 2002.  It’s a newly acquired car and appears to have had an exploding guibo that damaged my shift shaft and case cover where shift shaft seal sits.  Thanks,  Bill

I do have it, message sent with info. 

[Adhvanit]

Brandon,

 

I'm in need of a new intake manifold for a solex 2-barrel carb.

I also need the fuel pump push rod pin.  I think the 88mm (short) one.

 

Oh, and a radiator for a '74 automatic.

-J

Edited May 11, 2020 by Adhvanit

[A6BigAl]

Hi Brandon!

 

Do you have an intake manifold (single cylinder stack) for a plastic runner tii (1972), cylinder 2 or 3 (same part number-  11611254422, # 8 or #10 in the schematic at https://www.realoem.com/bmw/enUS/showparts?id=2583-USA-01-1972-114-BMW-2002tii&diagId=11_2397 ?

 

THANK YOU  Sir!

 

Alan

a6eholdings@gmail.com

 

[Tknackstedt]

Hey Brandon,

Looking for the housing and or just the plastic and interlocking metal rings that hold the glass in place on an instrument cluster.

I have functional gauges so I am trying to avoid buying a completely new instrument cluster

 

Tom

 

[Harry Malkas]

Hi. If Brandon does not have one I have a wood grain cluster surround for $50 plus shipping.

 

[Brandon]

19 hours ago, A6BigAl said:

Hi Brandon!

 

Do you have an intake manifold (single cylinder stack) for a plastic runner tii (1972), cylinder 2 or 3 (same part number-  11611254422, # 8 or #10 in the schematic at https://www.realoem.com/bmw/enUS/showparts?id=2583-USA-01-1972-114-BMW-2002tii&diagId=11_2397 ?

 

THANK YOU  Sir!

 

Alan

a6eholdings@gmail.com

 

I do have parts for the early Tii intake.

[Brandon]

16 hours ago, Tknackstedt said:

Hey Brandon,

Looking for the housing and or just the plastic and interlocking metal rings that hold the glass in place on an instrument cluster.

I have functional gauges so I am trying to avoid buying a completely new instrument cluster

 

Tom

 

Tom I don’t have individual parts off of the gauge cluster to sell, like to keep everything together.  See Harry’s post, looks like he can help you with what you need.

[hamid]

hi, do you have rear seat for e10 Baur?

[Brandon]

On 5/15/2020 at 5:12 PM, hamid said:

hi, do you have rear seat for e10 Baur?

No baur parts, sorry.

[man_mark_7]

Hi Brandon,

 

Any chance you have a lower seat frame for '73 driver's side seat? I would buy an entire seat if the price is right, upholstery could be totally ragged if the frame is good.

 

mm

[Komrade]

Do you have a front bumper center section for a 1967 1600?

[Noel Saubers]

looking for an exhaust manifold for a 72 tii

[CRMonty]

Looking for alternator pulley fan and nut 74Tii

[Brandon]

On 5/18/2020 at 6:50 PM, Noel Saubers said:

looking for an exhaust manifold for a 72 tii

Yes I have a Tii manifold, pm sent with info.

[easton]

I'm looking for an ignition module. My key went kaput and is rigged with a switch right now. I would like to replace the entire ignition column with a new keyed unit, but would be interested in just the cylinder assembly too