Right trunk interior panel

[1936spyder]

Interested in a right trunk interior panel for my '73 as mine was cracked in half when I bought the car. This is the grey masonite panel with a circular hole in it that the gas tank filler neck passes through. Looking for a clean used piece without chewed up edges that I can paint if need be.

 

Sent from my LGMP260 using Tapatalk

 

 

[Guy Cocquyt]

The originals were 3/8" plywood covered with a grey vinyl. I replaced mine using the old ones for a template.

Sent from my STH100-1 using Tapatalk

[shermanmartinez]

Guy, the original poster is referring to the SIDE panels, not the floor panels.  The right panel has a hole to allow the fuel filler connecting hose to pass through it.

I believe I may have a couple of them.

shermanmartinez at Hotmail dot com

[artbo]

PM sent.

[Guy Cocquyt]

Thanks for the clarification, were these standard on all 02's?
My car lacked them when I bought it.

I would love to see what these side panels look like and try to replicate them.

Guy

Sent from my STH100-1 using Tapatalk

[esty]

 

 

 

i make them...originals were a heavy cardboard like material, masonite maybe...not vinyl covered, painted grey. only in roundies,  will not fit square tails

 

 

[Conserv]

11 hours ago, Guy Cocquyt said:

Thanks for the clarification, were these standard on all 02's?
My car lacked them when I bought it.

I would love to see what these side panels look like and try to replicate them.

Guy

Sent from my STH100-1 using Tapatalk
 

 

Guy,

 

Round taillights had them, but U.S. square taillights dropped them because the U.S.-mandated crash reinforcements interfered with the side panels. I don’t know if European square taillights had them.

 

Regards,

 

Steve

[1936spyder]

Esty makes them as does Forrest/Kooglewerks (although his trunk panels are covered in a black vinyl).

 

Sent from my LGMP260 using Tapatalk