Parking Brake Cable Tube End

[David Layton]

We had to remove the last few inches of the driver's side parking brake cable tube to get the last bit of the broken collar and debris out.  So, we are looking to see if anyone with a chassis that is being parted out had the last 12" inches of the left side brake cable tube available for a graft?

 

Thanks!

David 

[Guy Cocquyt]

I had the same problem and replaced the tubes with a coiled automotive copper tubing which was easy to bend to fit the original contours. I used tubing clips to mount it and the i/d of the pipe was an exact match to the original. I found this at NAPA.

Sent from my STH100-1 using Tapatalk

[David Layton]

Thanks,  We found that on one of the 2 rusted parts cars we have, the tubes were still good but needed some cleaning and POR.  So we took a piece off of this.  We will need to get a thin piece to make a sleeve over the joint.