Looking for photo of early door sill

[djminkin]

I have a 1969 ti and I’m trying to remember what the sill is supposed to look like finished. Are there two trims or one?  Maybe someone can help 

[Mike Self]

A '69 will have only the narrow grey plastic sill cover with a rubber seal--it covers the welded seam and holds the carpet edge in place.  The sill itself is painted body color and has no black plastic step plate--those were on squarelights only.

 

mike

[djminkin]

Thanks can someone provide a photo 

[djminkin]

What’s wrong here?  Backwards?

[djminkin]

[djminkin]

bump

[02Les]

3 hours ago, djminkin said:

What’s wrong here?  Backwards?

That's correct.

You are missing the seal that lays outside of that. I believe it tucks under the edge of the cover you have and collects the ends from the door seal at A & B pillars. I suspect the seal is long NLA just like your narrow cover.

[jgerock]

I bought new seals for my 69.  Pictures to follow later.

[jmr_1602]

Factory interior photo. 67 I think.



Another I have cached.



Hope this helps.

Jason


Sent from my iPhone using Tapatalk

[djminkin]

So does the seal go under the gray sill cover?  Is it available anywhere?

[Mike Self]

IIRC the ends of the perimeter door frame seal (with the little tabs) tucks into each hollow end of the grey plastic sill cover, and I believe there's a hollow rubber seal that clips into the rigid grey plastic sill cover.  

 

Look on page 41-25b in the factory parts book...(should also be on Realoem.com)

 

mike

[69Bimmer02]

This is the best one I have but yeah you're missing the extra rubber seal that fits under the plastic piece. You can zoom in on the rear of this picture.

Sent from my SM-G973U using Tapatalk

[NickVyse]

another view..

 

[djminkin]

thanks. Both walloth and Rogers have it available 

[jgerock]

Here's both my 69 (Riviera) and 73tii (Malaga) door sills.