Kugelfischer oil feeder tube info?

[bergie33]

45 minutes ago, SydneyTii said:

The banjo needs to be thick enough to clear the near by machined lip, if not the crimp on the pipe is pushed out and you can’t seal the mating faces.

 

 

 

Got it.  I noticed the IE stainless hose has a long narrow neck on the banjo end, probably for this purpose.

 

I just want to by some plastic cohline tubing that's fuel and mild pressure rated.  Maybe I'll go to the local Hose Shop and see if they have something.

[JohnS]

I've seen this from IE.  I have no experence but have been thinking about buying one...

 

Good picture of the stock black plastic line that you're looking for at least bergie...

 

Stainless Steel Tii Kugelfischer Pump Oil Feed Line – Ireland Engineering | Racing & Performance Parts for BMW & MINI

WWW.IEMOTORSPORT.COM

---

Each

 

Edited June 19 by JohnS

[Son of Marty]

Awful close clearance for the braided hose, as it will saw it's way through anything it touches.