WTB: Parts to finish my project

[smyleboyd]

Hello! Im currently having trouble finding some parts to finish my project. Im located in the sf Bay Area. I can come pick up parts or pay for shipping. Please let me know if you have any of these things and we can work out a deal!

 

 

Im in need of the metal bushing for the speedometer cable that goes into the transmission on a Getrag 245 from a e21

 

 

 

I need the hardware for 320i calipers. They are the vented calipers. I sent them to IE to be refinished and accidentally sent the hardware with them and didn't get them back. 

 

 

 

I need the parts for a dipstick. its the one that mounts on the block with four bolts

 

 

 

Im also looking for a distributor flange and a rear bench seat. Thank you for any help

-Kyle 

 

 

 

[Ensign]

1 hour ago, smyleboyd said:

I need the parts for a dipstick. its the one that mounts on the block with four bolts

 

You may want to check that. I believe you need part #7 if that is a photo of the actual block you are working on.

Good luck with your search.

Regards,

Tony

[esty]

BRAKE HARDWARE

[stephers]

The speedo bushing is the same as a 4 speed, if you have your old one, use that one.    Realoem shows that it is still available new    $8.34  

 

Thanks, Rick

[shermanmartinez]

I sent you pictures of the distributor flange as well as the hardware for it and you never set a date to come pick it up.

I have the caliper hardware.

[smyleboyd]

On 10/6/2021 at 6:20 PM, stephers said:

The speedo bushing is the same as a 4 speed, if you have your old one, use that one.    Realoem shows that it is still available new    $8.34  

 

Thanks, Rick

 

 

Are you sure about this? If its true it will save me a headache 

[smyleboyd]

On 10/6/2021 at 1:51 PM, Ensign said:

 

You may want to check that. I believe you need part #7 if that is a photo of the actual block you are working on.

Good luck with your search.

Regards,

Tony

 

 

Yes that is the block im working on. Anybody know exactly which one I need? thank you for the input 

[Ensign]

On 10/11/2021 at 4:40 PM, smyleboyd said:

Anybody know exactly which one I need?

You may want to consider posting your question in the "Discussion" section, where more eyes will see it.

Regards,

Tony

[shermanmartinez]

The dipstick you reference in the diagram will not work on the block you have.  The hole in the block to accept the dipstick would have to be in the middle of the four holes.