Jump to content
  • When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

does.any.of.this.make.sense?


ztdream

Recommended Posts

Hey.there..so.I.finally.got.around.to.changing.the.distributor

flange.seal.on.my.76.02...well.like.an.idiot.I.marked.the.cap.postion.

but.thought.the.button.would.stay.still.for.the.operation..and.lost.my.

timing....

here's.the.interesting.bit.though..while.trying.to.get.my.timing.back.by.

ear.I.am.turning.it.clockwise.and.as.it.starts.bogging.down.the.leak.

returns(ie..oil.hits.the.manifold.and.starts.smoking...as,I,back.off

(turn.it.counter.clock.wise).the.leak.stops....I.go.back.clockwise.it.starts.

etc.etc...Sooooo..first.question...WTF?

Second.question..I.have.it.farily.well.timed.now.and.since.I.now.can

run.the.breather.hose.to.the.airfilter.without.driving.in.a.cloud.of.smoke..it.runs.nice.and.fast..however.I'm.worried.cuz.the.engine.feels.a.little.hot...is.it.possible.to.burn.up.an.engine.by.having.it.timed.wrong??

I.did.accidently.run.it.for.about.2.miles.with.pretty.low.coolant.since.I.had.to.move.the.heater.hose.to.get.a.socket.behind.the.distributor...but.after.refilling.it.the.needle.is.staying.below.the.halfway.mark.

recaping...

WTF?

and.can.you.kill.a.car.by.having.it.ill.timed?

also..still.hopin.someone.wants.to.come.take.a.look/listen.at.my.car

I;m.in.between.venice.and.santa.monica(safe.neighborhood;)

no fear is senseless but too much fear is pointless.

Link to comment
Share on other sites

MORE>READER>FRIENDLY

Hey.there..so.I.finally.got.around.to.changing.the.distributor

flange.seal.on.my.76.02...well.like.an.idiot.I.marked.the.cap.postion.

but.thought.the.button.would.stay.still.for.the.operation..and.lost.my.

timing....

here's.the.interesting.bit.though..while.trying.to.get.my.timing.back.by.

ear.I.am.turning.it.clockwise.and.as.it.starts.bogging.down.the.leak.

returns(ie..oil.hits.the.manifold.and.starts.smoking...as,I,back.off

(turn.it.counter.clock.wise).the.leak.stops....I.go.back.clockwise.it.starts.

etc.etc...Sooooo..first.question...WTF?

Second.question..I.have.it.farily.well.timed.now.and.since.I.now.can

run.the.breather.hose.to.the.airfilter.without.driving.in.a.cloud.of.smoke..it.runs.nice.and.fast..however.I'm.worried.cuz.the.engine.feels.a.little.hot...is.it.possible.to.burn.up.an.engine.by.having.it.timed.wrong??

I.did.accidently.run.it.for.about.2.miles.with.pretty.low.coolant.since.I.

had.to.move.the.heater.hose.to.get.a.socket.behind.the.distributor...but.

after.refilling.it.the.needle.is.staying.below.the.halfway.mark.

recaping...

WTF?

and.can.you.kill.a.car.by.having.it.ill.timed?

also..still.hopin.someone.wants.to.come.take.a.look/listen.at.my.car

I;m.in.between.venice.and.santa.monica(safe.neighborhood;)

no fear is senseless but too much fear is pointless.

Link to comment
Share on other sites

What exactly did you replace?? Just the dist. housing gasket? Did you replace the o-ring around the dist. shaft? Did you replace the special o-ring washer that goes under one of the dist housing bolts??? The last one is VERY important, and often overlooked.

Are you sure the oil is not leaking past an exhaust stud and dropping onto the manifold?? A common problem with loose studs...you should be able to pull the leaky stud out, put some loctite or something on it and reinstall to help with the leak. Make sure the threads are clean + dry before you do the loctite trick.

Oh, and yeah- it's possibly to toast an engine with messed up timing- need to fix that soon.

Bret.

Link to comment
Share on other sites

I.didn't.replace.the.O.ring..I.did.inspect.the.bolt.seal.i.think...it's.metal.

right??..on.the.farthest.from.reach.bolt.on.the.top.right?..aka.the.shorter.

bolt...if.there.is.something.other.than.a.little.thick.metal.washer.I.am

.pretty.sure.it.was.missing.

It.is.possible.the.current.leak.is.coming.from.elsewhere..though.while.

changing.the.seal.I.had.to.do.alot.of.waiting.and.drying.as.their.was.a.

slight.leak.coming.from.the.bottom.of.the.distributor.housing(maybe.just.standing.oil?)

right.now.my.primary.concern.is.the.timing.though...do.I.want.to.turn.it.

clockwise.till.I.hear.pinging.up.a.hill.and.then.turn.counter.clockwise.till.

it.ceases?..or.is.it.the.oposite?

is.this.method.pretty.trust.worthy?

Anyone.wanna.come.take.a.look!!?

no fear is senseless but too much fear is pointless.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Upcoming Events

  • Supporting Vendors

×
×
  • Create New...