Headliner installed! Lots of pics!

[snowflake]

A days worth of work and i'm happy how it turned out,

This is my first liner install, and it was not hard, just takes patience, and do one little step at a time. and alot of adjusting to get it right.

[snowflake]

(nt)

[snowflake]

(nt)

[snowflake]

I used 1/2 inch foam on the pillars and 1/4 inch on the deck lid, i did not glue the headliner to the deck board where the doom light is.

The whole job took around 10 hrs,

signing out

[snowflake]

The pictures where in order from begin to end but this is jumping all over the place.

oh well!

[jerry]

Great job, thanks for the detailed posting.

This should definitely be added to the FAQ Construction Forum as a good reference for all.

[SteveJ]

Agreed! This one should be a FAQ!!!!!

Timing is perfect as I will be doing this job in the near future.

Good photo-documentation. Were you working solo on this job?

[snowflake]

Thanks, actually i did do this job solo,

I started at the rear and slowly moved towards the front of the car finishing one step at a time eg. rear pillars, sunroof.

ATTENTION: if their's one thing i learned from doing this and those about to do this should pay attention, is to give yourself a little material to play with, Do not expect to sung up the headliner and then simply bolt up the accessories, do not cut the material really close untill all the sun visor and mounting bracket, sunroof crank, rearview miror are in position, once all accessories are bolted in position, and your happy with snugness, then go for final trim.

Other than that it's not really that hard.

good luck!