FS - 1990 S14 / Wiring Harness / ECU

[Mike_B]

I have a spare S14 with approximately 118,000 miles that was pulled out of a 1990 E30M3. Include is the stock wiring harness, ecu, and clutch/pressure plate.

The engine was running fine (smooth, pulled hard, no smoke or oil drips) when it was removed. It seems to be well maintained, however, I do not have any compression numbers. Paint on the valve cover is flaking.

I am looking to get $3k + shipping. The engine is located in Geneva, IL (a western burb of Chicago)

I can arrange to have the item shipped via freight anywhere in the continental US.

[Guest Anonymous]

such as the plenum, throttle bodies, exhaust manifold and downpipe, alternator, water pump, airbox, etc.. included?

shermanmartinez@hotmail.com

[Mike_B]

It is a complete engine minus the AFM.

[Mike_B]

I've had some interest, but the engine is still available...

Shipping (shrink wrapped and strapped to a pallet) should run around $300 door to door.

[Mike_B]

Get your M2 project started... Still available.

[Mike_B]

SOLD!

[bmdubracing]

Hey mike just wanted to know if you still had the s14 or any off the related parts I am interested in what you have, Im doing the swap over and need parts bad, thanks

Kyle

You can email me at bmdubracing@hotmail.com, I also check the faq all the time.