Flareless Turbo Front Spoiler?

[dumpedDAILY]

I know this is a whole lot later lol but would this still be able to get and did anyone end up getting one?

[cosm3os]

Post when you hear back from Sweden.

If you guys dont want to pop-rivet it on - I have a 5mm rivet nut tool that I can loan so we can get these bad boys mounted! You'll need to pick up the inserts and fasteners.

I got mine here - stainless steel:

http://www.mcmaster.com/#97467a639/=4n8h7q

With the torx fasteners - zinc plated (not all thieves carry torx drivers):

http://www.mcmaster.com/#92832a442/=4n8i43

 

Sorry to drag up an old thread.  I'm installing an IE ABS dam.  Leaving it black, so I wanted a black screw.  I would think that a built in washer/flange would be a plus.  So how about these with the same style nutserts?  If I wanted to use std rather than metric, what would be the similar size nuts and bolts?  10-32x5/8" is what I'm thinking.

 

http://www.mcmaster.com/#catalog/119/3106/=px2ge2

 

Thanks

Edited December 22, 2013 by cosm3os

[jprocket]

cosm3os - the link you posted looks like they are stainless steel and will not be black.  Pick a fastener and a matching rivet nut - the standard size you are looking at should work.

[cosm3os]

Well, the riv nut will be hidden behind the dam, so that won't matter.  I was more concerned with some kind of metalic interaction between the anodized and the stainless or whatever that might cause problems.  Got them ordered and I'm measuring 4x before cutting . . .

[adawil2002]

I added an air dam to my CSi coupe, Athena. I used stainless phillips head screws and neoprene washers to make a watertight seal. Got them at Lowes. 

[cosm3os]

I was going to dab some sealant on the rive nuts before I pop em.

[M3M3]

no need to make that water tight......the backside is exposed to water through the grill anyway.