Behr A/C wanted for tii

[BMWonly]

Hi, I am about to buy a non-A/C tii and want to install the Behr A/C. So I need as much as possible, at least the Behr center console with the blower and condenser, evaporator and drier. Compressor not so important, as I will be using a Sanden rotary type. I heard the tii pulley is hard to find, so that might be a challenge.

Please let me know what you have.

Dieter

deetman@sbcglobal.net

530-320-6087

[jerry]

i'll have to verify the Behr components i have and condition

i also have the tii A/C pulley

jerryallsmanATyahooDOTcom

[02hobiedave]

Hi, I am about to buy a non-A/C tii and want to install the Behr A/C. So I need as much as possible, at least the Behr center console with the blower and condenser, evaporator and drier. Compressor not so important, as I will be using a Sanden rotary type. I heard the tii pulley is hard to find, so that might be a challenge.

Dieter, I think condenser and blower parts would be good used so the system looks original but I would buy aftermarket new o-ring fittings and

hose kit, evaporator and dryer. Nostalgic air parts is a good place to start.

Thats how I did mine including my rotary compressor.

Dave

[BMWonly]

Thanks Dave.

I have received a few good responses, and it looks like I will have the chance to buy - from different sources - all interior components (console, blower, evaporator, wiring harness) and the pulley, plus the condensor with aux fan and drier. Depending on condition and availability, I will complete the rest, plus hoses, lines and fittings will be new aftermarket parts.

Dieter