74tii air breather connections

[eaker02]

74tii,

PO had put a K&N breather on the car and finally getting a chance to put the original breather/canister on.

I have three inlets on the cannister. One I know is for the blow by from the Valve cover.. Any idea where the other two go? any pics?

One inlet looks like it may go to a blocked off line on the plenum the other inlet is very small.. Have no idea.

I just saw in the archives a pic. I don't have a valve on my breather, so is it better to plug the other lines?

Also using a 008 dist. no vacum

Thanks

Ron

[02Les]

Don't know if this pic helps. Don't have a tii, just a pic!

[penth2o]

Sorry Ron,

Mine is off the car. I just shot a couple pics for you that may help. If not email me & I can put it back on with better pics.

The one hose coming from the valve cover has a hole in it W/nipple that goes to the throttle body fitting. Hard to see in pic.

The cloth one goes to the firewall.

[eaker02]

Thanks guys.. The blue cloth makes sense, vent back to tank..

Since don't have the valve, will just plug the other one.

ron

[John_in_VA]

(nt)

[eaker02]

Thanks, after pulling the blocked off line up from the tranny area, it was more of a gray color.

ron

[penth2o]

Mine is grey/silver in color. Same as the other cloth lines you see in the full motor pic.

I have blue on the brake fluid reservoir.