are these the right conrol arm bushings

[vintage_car]

I labelled them, do these look right for the 02? I want to make sure before I take them to a machine shop and have them pressed into the right areas. The outer is closest to the ball joint on the control arm, right?

[jerry]

those look right. the way i determined that i had the wrong bushing was that the ID of the center bore was too small for the 'radius rod', or whatever those things are called. plus the effort to install was way too much. verify that the center bores fit their respective bolt/radius rod.

[Tommy]

Inner ones should have 16mm hole and outer ones 14mm.

Tommy

[vintage_car]

the metal tubes match, so they must be right. I'm gonna have them pressed in- I'm tired of busting my fingers and knuckles...