WTB: Intake bypass parts UPDATED!

[pikeperkins]

I need to bypass my intake. Before I order with Steve, I wanted to ask if anyone has these parts (in red) to bypass my intake.

The divider's part number is 11531267535

The return pipe's part number is 11531266817

The reducer hose part number is 11531266472

P.S. If I'm missing anything, please let me know. N00b talkin' here.

[kpolito99]

I have a spare item which is the coolant manifold for the cylinder head.

[ianpringle]

I have the coolant bypass pipe & hose (parts #14 & 15 in the diagram), from an E30 318i - I don't know if they're the same as the ones used on the '02/E21 M10 engines? Ian - Ontario, Canada: pringle_5@sympatico.ca

[pikeperkins]

You know, the more I look at this, I think the waterneck shown may not be what I need. I need to eliminate the hose to the manifold. It looks like this one has it. Can someone confirm this?

[Fishhead]

You'll need a "divider" like shown in this thread

http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,336469/highlight,/

I bought that one shown, but you can probably find someone with one on the message board.

[kpolito99]

Pike,

You can look for a coolant manifold without the pipe fitting, remove the hose fitting and thread in a plug or remove the fitting and have the manifold plugged with weld.

I would opt for option #2 so that you can always use this part as it was originally intended at some other date.

[Guest Anonymous]

You can also choose whether you want two or three sensor ports.

Located in Vacaville,Ca.

shermanmartinez@hotmail.com