Jump to content

tdk930

Solex
 View Profile  See their activity

  • Posts

    443

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Everything posted by tdk930

  1. tdk930
    email sent - i have one
  2. tdk930
    where are you located? Todd
  3. tdk930
    Well - I am still stumped. I pulled it apart and the upper mounts are both two-dot so they are the same height. All the metal is solid - not rusted out. I pulled both springs out and they are the same height. Could the spring have a bad spot? Any way to check them out / tested? Why would the drivers side sag in the rear? Todd
  4. tdk930
    no email address as well - probably a prepaid phone too...
  5. tdk930
    I have a horn button that i bought for my Porsche spyder replica that had a Nardi wheel. I think it might be what you are looking for. drop me an email at the link above and i can send you a picture. Todd
  6. tdk930
    i have one - drop me an email at the link above. Todd
  7. tdk930
    Hi - i am in PA. I have parts off a 74. email me at the link above and i can snap some pictures. Todd
  8. tdk930
    All - thanks for the help. I am going to pull the spring tonight and i have a spare pair that came off a tii . I am going to swap that one in and see what it looks like. Are 2002 Tii springs different than a straight 2002? Also - i first noticed this when i loaded up the trunk with camping gear in the fall. It was light stuff like tents, speeping bags, some food. Probably 100lbs but the car was so low, we could not take it. Todd
  9. tdk930
    I have a 76 2002 that is lisping to the left in the rear suspension. Its a good 1.5-2 inches lower on the left side of the car than the right. The shock towers are solid and don't show any issues. I pulled the rear wheel off today on the low side and the spring perch and mounts look good. The control arm looks good. I did hear a clunk while driving so i picked up a set of poly bushing to install over the winter. I suspect the spring as i don't see any issues (except a brake fluid leak - add to list). Is there anything else that could cause the lean and clunk? To pull the spring out, do i just need to remove the bottom shock bolt and push down on the control arm? Todd
  10. tdk930
    for what year? Todd
  11. tdk930
    i have these - email sent.
  12. tdk930
    Drop me an email at the link above. Interested. Todd
  13. tdk930
    Location?
  14. tdk930
    sorry to jump on your thread - i like your wheels. What size are they? Are they Aplinas? Todd
  15. tdk930
    interetsed - sent you an email. Todd
  16. tdk930
    i have some of the parts you are looking for - drop me an email at the link above. Todd
  17. tdk930
    i have a set of 74 Tii rear tan side panles with armrests. Let me know if you are intersted. email at link in header. Todd
  18. tdk930
    I have a set - drop me an email at the link above. Todd
  19. tdk930
    what year are you looking for. I have some 74 parts. Todd
  20. tdk930
    I have a new Bosch starter for a 2002 if you are interested. Email me at the link above. Todd
  21. tdk930
    sold
  22. tdk930
    Drop me an email at the link above in the header. Todd
  23. tdk930
    I have a 74 bumper if that one will work? Todd
  24. tdk930
    Still Available.
  25. tdk930
    SOLD
×
×
  • Create New...