PDX.Duke

On 2/5/2024 at 7:17 PM, walkinfool said:

Welcome to the FAQ!

 

The skinny is that Mike (O'hara) became ill or passed away but his partner, Craig was running the biz and is/was a fantastic wrencher. Sadly, Mike's sister took over the shop (April 2022), kicked Craig out, and liquidated the entire shop including parts, tools...you name it! I've heard good things about Boyd Motor Werks and Pacific Motorsport - both in Portland. 

 

best,
Mitch

Thanks Mitch (yeah, a little slow on my reply - life has been interfering and meddlesome of late).

FYI, I went by Pacific Motorsports shortly after getting my '02 (Sept '23) and was told that they had "a guy" who worked on all the 2002s, but that he recently left and they weren't in a position to be of much help.

Quick backstory: I bought my '02 last summer and have had some attention paid to it my a mechanic, but with the intention that I would learn how to do, and do, everything I can by myself. I know "some stuff", but am not a practiced wrencher by any stretch. I'm smart and I know how to do my homework and figure as much out before I dig in too deep, but I know next to nothing compared to what I expect is the baseline knowledge of this group. Like I said... a bona-fide noob! 😉

OK, so: My 1st project (And, as they say: One thing leads to another!):

To address a rotational "click" coming from my left wheel (which, prior to a mechanic having rotated the wheels, came from the right), I diagnosed it as too close a tolerance between the wheel weights and the brake calipers. So, I got equipped with a floor jack and jack stands, got her in the air, removed the tire and had my tire shop rebalance it with the weights positioned more appropriately. I haven't been able to test it out yet because...

With the wheel off I noticed what looked like mild wear on the exterior of the left caliper (due to weights rubbing?), I thought I'd pull the right tire to see if it was evident there as well. 3 lug nuts came off fine  but the 4th was resistant. I went slowly but quickly realized that the stud was turning with the nut, and off it came with the lug nut still firmly attached.

Looks like I'm going to learn how to replace a wheel stud!

Questions:

1. Stud type:

I haven't pulled off the hub/rotor assembly yet to see what the other studs look like on the other side, and I suspect this 1st question might get answered when I do, but: Why would the stud have what looks like weld marks (see photo below)? From what I gather, studs are either press-in or screw-in. I haven't come across any reference to "weld-in".

What type of stud is recommended, press-in or screw-in?

2. Removing the caliper:

In all the tutorials I've seen, the calipers are connected to flex line and they just get "hung" there after removal. Mine are connected to hard line. Is this normal for us? And if so, how best to relocate and support caliper while I'm doing the work?

3. Installing studs:

It appears the critical thing is to get the stud properly "seated", either by using a press (I don't have one) or either a stack of washers or a wheel stud installer (which looks like it functions exactly like a stack of washers?) and an impact wrench (I have that!). Does the stud need to set to a particular torque spec? Or just properly seated to the hub?

•••••••••••••••••••

I'm sure I'll have more questions, but can't think of them in this moment. For whatever insight and advice comes my way here, I'll be enormously grateful. 🙏🏼

Thanks very much,

Doug

PS. Here she is, patiently waiting for me to "fix" her and get back out there for some twisties.

Did you have these refinished or were they refinished when you got them? Painted or powder coated?

On 9/24/2023 at 10:53 AM, TobyB said:

Well, there are a few good people in the Portland area, too, 

depending on what you need.

If Mike O'Hara's still open, he's good.

Hey Gordon, chime in here!

 

t

Thank for the referral! Sadly, Mike O'hara's is "closed permanently", since when I don't know.

On 9/23/2023 at 5:19 PM, AceAndrew said:

Hi Doug,

 

Welcome to the FAQ, glad to have you here. You will find many questions have been asked and answered numerous times before.  The articles section and the search function will yield a lot of great information.

 

There are a lot of FAQ members in the northwest and some great shops.  My personal favorite is Patrick of Midnight Motorsports in Seattle.  You'll find his name mentioned many times before.

 

Looks like you've picked up a great looking early 02 hotrod with lots of fun bits.  I really like the interior choices.  Despite the very cool engine bits, you'll find a number of us are rather skeptical about the HP claims.  However, at the end of the day it's got to be very very fun to drive.

 

Andrew

Andrew,

Sincere apologies for the very delayed reply. I've been so busy lately, and the weather so uninspiring from a get-the-car-out-of-garge-and-drive perspective, that I haven't been focusing on my little beast. Planning to change that soon.  

I really appreciate your having taken the time to share Patrick's info - I'll hunt him down!

I debated even including in my profile the HP stats given to me by the seller (a Dyno sheet was provided and all that), because yeah, numbers is just numbers and people like to throw them around a bit recklessly. I think I'll likely edit in a disclaimer at least.. 😉👍🏼

And yes, it is WICKED fun to drive!

6 hours ago, bpeckm said:

I'm getting a real kick out of this long-lost thread!  I'm in Portugal and trying to learn about the BMW 1600s and others that were evidently built here.... this thread is GOLD!  Thank you for the information, if any of you is still into this stuff!  

My Portuguese '71 2002 was just very recently imported, via the Netherlands, to the states. I learned from BMW while researching the VIN that the vast majority of these were delivered to Portugal as CKD kits (Completely Knocked Down) for assembly in PT (done in order to avoid import tariffs).

Acquired just 4 months ago from a seller in The Netherlands who had it for about a year, but just had a lovely 2 hour WhatsApp chat yesterday with the owner previous to him (of 20 years) in Portugal who was responsible for getting the car to its current condition. I had hoped to confirm the color as Atlantik Blau but he said he had it repainted years ago and all he could remember was that it was a custom color.

Sure looks like Atlantik to me, but assessing any car's color from a photo is always very tricky. 

Hello all!

This is my first post having just acquired my '70 2002 ("Alpina tribute"). I'm just getting my sleeves rolled up and making copious notes on the car and things that may need to be addressed mechanically as well as restoratively.

I'd be grateful to benefit from the deep experience of the community with referrals to qualified, seasoned, experienced and expert technicians in or near Portland, Or. or within the broader Pacific Northwest region (Seattle area?).

I'm sure I'll be becoming more active on this forum and will look forward to meeting some of you either virtually or in person someday.

Many thanks!

Doug 

🛞🛞🛞🛞